Metal Protective Guards

A heavy duty metal guard that is installed over the gas detector or controller

Helps protect the gas detection equipment against impact, abrasive damage, theft and vandalism

Applications

  • Parking Garages
  • Loading Docks
  • Fire Houses
  • Vehicle Detailing Bays
  • Hospitals / Laboratories
  • Fisheries / Hatcheries
  • Commercial Swimming Pools
  • Wineries / Breweries
  • and many more...

Key Features

  • Durable
  • Easy to install
  • Removeable
  • Discreet
  • Offers protection from impact, theft or vandalism
  • Protects sticky gas sensors in wet environments

Description

The Metal Protective Guard helps to protect against impact, abrasive damage, theft and vandalism to your gas detection system. Ideal for environments where vehicles could potentially back into the equipment, or in ice arenas where hockey pucks could hit the equipment or in locations here the general public might feel inclined to try to tamper with the equipment. 

The Standard Metal Guard is available in a small size that fits over transmitters or a larger size that fits over CET controllers. It is made from 16-gauge powder coated steel with ½” (13 mm) square openings in the front to allow the gas and air to flow unobstructed through to the sensor.

The Metal Splash Guard is available in a small size that fits over transmitters and is made of 16-gauge powder coated steel with louvres and a protective top cover to deflect water. The Metal Splash Guard model is recommended for use in applications where sticky gases are being monitored (such as Ozone, Chlorine, Chlorine dioxide, Hydrogen chloride or Hydrogen cyanide) and protection from water ingress is required.

There are four slotted mounting holes making for easy installation and removal for gas detector servicing easy.

Mechanical
Enclosure
16-gauge powder coated steel
Weight
Standard Small Guard: 800 g / 1.7 lbs
Standard Large Guard: 1.7 kg / 3.8 lbs
Metal Splash Guard: 1,000 g / 2.2 lbs
Size
Standard Small Guard and Splash Guard:
17.8 cm / 7 in wide (coverage area), 25 cm / 9.88 in wide (total)
15.9 cm / 6.25 in tall
9.5 cm / 3.75 in deep

Anchoring Holes: 21.3 cm / 8.38 in horizontally and 10.7 cm / 4.25 in vertically
Standard Large Guard:
25.4 cm / 10 in wide (coverage area)
32.7 cm / 12.9 in wide (total)
27.9 cm / 11 in tall
12 cm / 4.75 in deep

Anchoring Holes: 28.7 cm / 11.31 in horizontally and 24 cm / 9.5 in vertically
Product Codes
SCS-8000-RSG
Standard Small Metal Guard, 16-gauge, powder coated protective guard for transmitters
SCS-8000-SPG
Standard Large Metal Guard, 16-gauge, powder coated protective guard for controllers
SCS-8000-WSG
Small Metal Splash Guard, 16-gauge powder coated protective guard with louvres for transmitters with sticky gas sensors like Cl2, O3 HCN, PH3, HCl, etc.

Options, Accessories and More...