Calibration Kits
The complete Calibration Kit contains the items necessary for common field and shop calibration. Smaller kits are available if not all items are required. Choose the calibration kit that gives you the tools you need for calibration.
- Easy access and transport of the tools required for calibration
- Fittings and adapters accommodate different sized gas cylinders
- Industry standard calibration adapter plug fits all internal sensors
- Weather resistant carrying case (complete Calibration Kit only)
Description
The complete Calibration Kit comes in a durable, hard plastic carrying case and contains the items necessary for common field and shop calibration. If not all items are required, choose a smaller kit with the items you do need.
Cylinders of zero air or calibration span gas are not included; these must be ordered separately. CET offers a range of gas types and concentrations in 17 L, 58 L and 100 L sizes. However, gas cylinders cannot be shipped from Canada to other countries, including the USA. Contact CET or our Customer Support Team at sales@cetci.com for more information.
NOTE: These calibration items are not suitable for use with the YES AIR or YES Plus LGA.
Specifications
Included in the complete Calibration Kit
| 1. Regulator | Regulator for fixed flow @0.5 LPM for 34L, 58L, 74L, 100L cylinders |
| 2. Teflon Lined Tubing | Teflon lined, non-absorbent tubing, (2 ft / 61 cm, 3/16” ID, 5/16” OD) for calibrating sticky gases |
| 3. Calibration Cap "Cal Cap" | Calibration Cap with 2 ft / 61 cm, 1/16” ID, 5/16” OD) standard tubing |
| 4. Cal Cap Adapter | Calibration Public Space Adapter for use with the Calibration Cap when calibrating CGAS-AP and CGAS-DP models |
| 4. Potentiometer Adjustment Tool | Potentiometer screwdriver with an inset and protruding end for adjusting resistors |
| 5. Magnetic Wand | Magnetic wand for non-intrusive calibration (2 5/8” x 1/4” hexagon) for use with the LPT-A, LPT-B, LPT-M, LPT-P and the SCC and DCC |
| 7. Brass Fittings | Brass fitting to convert fixed flow regulator for use on 15 L and 17 L cylinders |
| 8. Calibration Adapter | Calibration adapter for CXT2 Explosion Proof transmitter, comes attached to standard tubing when the complete Calibration Kit is purchased |
| 9. Extraction Tool | Sensor extracting tool for replacing used catalytic and solid state refrigerant sensors |
| 10. Sponge | Spare humidification sponge |
| 11. Hard Case | Durable, hard plastic carrying case with handle |
| 12. Humidification Chamber | For calibrating solid state refrigerant and TVOCs sensors, shown with standard gas flow tubing |
| 13. Cal Clip | For hands free calibration on devices with a splash guard (factory installed Option -S) |
Calibration Kits Options
18 options available
Showing 1–18 of 18 configurations
SD-CAP
Calibration Adapter Plug for CGAS-SD, Nylon 11, Black-Dyed
CET-8000-ESH
Calibration Adaptor cup for remote ESH sensor
CXP-CAL
Calibration Cup/Remote Sample Adapter for Explosion Proof Transmitter
CET-FIXP-CK2
Legacy CET Fixed Products Calibration Kit
CET-MW
CET, Magnetic Wand for Calibrating
CET-FFLO-CK3
Fixed Flow Regulator Kit
CET-SSRT-CK4
SS Refrigerant TVOC Calibration Kit
CET-8000-CMT
Tubing: 1/8" ID x 1/4" OD Tygon Clear MRI/SD/PRU 50Ft
CET-8000-CKFT
standard yellow sample draw tubing, 3/16in ID / 5/16in OD, 15 m / 50 ft roll
CET-8000-CTRL
Teflon lined tubing for CGAS-SD-NH3, special non-absorbent, 3/16in ID / 5/16in OD, 15 m/50 ft roll
CET-CAL-CAP
CET Calibration Cap (Cal Cap) for diffusion style calibration
CET-PUB-CAP
CET Public Space Adapter Assembly
CET-CAL-FIXP-KIT
CET Fixed Products Calibration Kit
CET-CAL-PUB-KIT
Public Space Calibration Kit
CET-CAL-KIT
Complete Calibration Kit
CET-SD-CAP
CET Calibration Cap assembly (Sample Draw variant)
CET-DUCT-KIT
DUCT KIT (Sample Draw variant)
CAL-CAP-REPL-KIT
CALIBRATION CAP REPLACEMENT KIT
Not all configurations are listed here. Contact our sales team to discuss your specific requirements.
Documents
Calibration Clip "Cal Clip" Datasheet
PDF • 408 KB • Datasheets
Calibration Kit Datasheet
PDF • 338 KB • Datasheets
Bump Testing Ammonia Sensors
PDF • 135 KB • Guidelines
Calibrating a Remote CXT2
PDF • 363 KB • Guidelines
Calibration with a Splash Guard (Option-S)
PDF • 266 KB • Guidelines
Calibration Kit Manual
PDF • 2.7 MB • Manuals
Related Products
LPT Low Power Transmitter
Single channel, analog gas detector for enclosed parking facilities, recreational facilities, oxygen depletion applications.
cGas Detector Ammonia Vent Line Transmitter
For continuous monitoring of Ammonia levels in the vent line of refrigeration systems. Mount indoors on the ammonia vent relief stack in refrigeration systems to help detect equipment failure.
ESH-A Remote Sensor
Single analog remote sensor for flexible location monitoring.
cGas Detector Digital Transmitter
One or two channel Modbus® or BACnet® gas detector with flexible customization options and Plug & Play Smart Sensor Technology.
cGas Detector for Indoor Public Spaces
Single channel gas detector with an aesthetically pleasing design to reduce noticeability when used in publicly occupied spaces such as hotels and schools.
cGas Detector Analog Transmitter
Single channel, analog gas detector with Plug & Play Smart Sensor Technology.
CXT2 Explosion Proof Transmitter
Reliable, accurate monitoring of toxic or combustible gases in potentially explosive and harsh environments, including hazardous-rated areas.
cGas Detector IR Refrigerant Transmitter
Non-dispersive infrared refrigerant gas detector with accurate, low level leak detection, available with analog output or BACnet® or Modbus® output and Plug & Play Smart Sensor Technology.
cGas-SC Self-Contained Controller
A self contained controller with up to 3 gas channels, Plug & Play Smart Sensor Technology and configurable logic control and priority settings. Offers superior user customization and reliable gas detection performance for monitoring many gases.
cGas-SD Sample Draw System
A Self-contained, single sensor sample draw gas detection system that draws sample air from locations where it is difficult to install a gas detector.
cGas Detector VRF IR Refrigerant Transmitter
An aesthetic, non-dispersive infrared refrigerant gas detector for acute leak detection in modern energy-efficient buildings utilizing Variable Refrigerant Flow (VRF) HVAC systems.