Critical Environment Technologies
    Traditional Refrigerants

    R-407C Leak Detectors

    R32/R125/R134a

    R-407C is a zeotropic HFC refrigerant blend (R-32/R-125/R-134a at 23/25/52%) designed as a direct retrofit replacement for R-22 in air conditioning and heat pump systems. With operating pressures and capacity similar to R-22, R-407C enables conversion of existing equipment with minimal modifications—typically only requiring oil change to POE and adjustment of expansion devices. The GWP of 1,774 positions R-407C between R-22 and R-410A environmentally. Temperature glide of approximately 7°C requires consideration for heat exchangers but is manageable in most AC applications. R-407C remains widely used for R-22 retrofit projects, particularly where equipment modification costs must be minimized.

    Need R-407C Detection?

    Get expert guidance on the right detection solution for your application.

    Key Information

    Essential safety and exposure information for R-407C

    Health Effects

    Low toxicity classification. May cause cardiac sensitization at high concentrations. Vapor can displace oxygen.

    Common Sources

    • Residential air conditioning
    • commercial HVAC
    • chiller retrofits

    Exposure Limits

    WEEL
    1,000 ppm (8-hr TWA)
    No OSHA/NIOSH limit
    No OSHA/NIOSH limit
    Blend of R32/R125/R134a
    Blend of R32/R125/R134a

    Regulatory Status

    EPA Classification
    HFC blend (non-ODS)
    ASHRAE Safety Group
    A1 (low toxicity, non-flammable)
    GWP (AR5)
    1,774
    ODP
    0
    Temperature Glide
    Approximately 7°C
    AIM Act
    Subject to sector-based phase-down

    Detection Requirements

    Mounting Height
    Near floor level, near potential leak points, 6–8 inches off floor
    Sensor Technology
    Infrared (NDIR)
    Detection Range
    0-1,000 ppm typical
    Response Time
    <30 seconds (T90)
    Calibration Frequency
    Annual recommended

    Build Your Gas Detection Expertise

    Explore upcoming webinars and personalized training from CET experts, covering gas detection technology, application guidance, installation, and commissioning.

    View Training & Webinars