RPS-24VDC Remote Power Supply
Provides additional power to large networks. Converts 90 - 240 VAC power to 24 VDC power, providing a renewed amount of power to compensate for voltage drops in large fixed system applications and/or very long wire runs
- Supplies power to a large gas detection system
- Boosts power on long wire runs that present a voltage loss condition
- Standard water / dust tight, corrosion resistant enclosure
Description
The RPS-24VDC is a remote power supply for large fixed system applications and/or very long wire runs. It converts 90 - 240 VAC power to 24 VDC power, providing a renewed amount of power to compensate for voltage drops. Projects requiring a large number of gas detectors or consist of very long wire runs require a remote power supply to boost the voltage to the last transmitter on the network run and to reinforce the voltage provided by the FCS Multi System Controller to the first line of transmitters. The RPS-24VDC comes in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secured door.
Specifications
Mechanical
| Enclosure | ABS / Polycarbonate, corrosion resistant Copper coated interior to reduce RF interference |
| Weight | 1.4 kg / 3 lbs |
| Size | 254 x 218 x 109 mm / 10.0 x 8.6 x 4.3 inches |
Electrical
| Power Requirement | Line Voltage: 90 – 240 VAC, 50 -60 Hz, 75 W |
| Output | 24 VDC, 65 W |
| Wiring | 4-conductor shielded minimum 18 AWG stranded within conduit |
| Fuses | Thermal, resetting |
Environmental
| Operating Temperature | -20°C to 40°C (-4°F to 104°F) |
| Operating Humidity | 20 - 90% RH non-condensing |
Certifications
| Conforms to: | CSA-C22.2 No. 205-12, UL508 (Edition 17):2007 EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010 FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. |
RPS-24VDC Remote Power Supply Options
2 options available
Showing 1–2 of 2 configurations
RPS-24VDC
Remote Power Supply w / hsg (FCS)
RPS-24V
Remote Power Supply w / hsg (PDC) *Use RPS-24VDC*
Not all configurations are listed here. Contact our sales team to discuss your specific requirements.
Documents
Catalog
PDF • 1.1 MB • Brochures
RPS24VDC Datasheet
PDF • 314 KB • Datasheets
RPS-24VDC Operation Manual
PDF • 352 KB • Manuals
Wiring Diagram: FCS-B with CGAS-D and RPS-24VDC
PDF • 497 KB • Wiring Diagrams
Wiring Diagram: LNK-XT Powered by RPS-24VDC
PDF • 112 KB • Wiring Diagrams
Related Products
Metal Protective Guards
A heavy duty metal guard that is installed over the gas detector or controller. Helps protect the gas detection equipment against impact, abrasive damage, theft and vandalism.
FCS Multi Channel System Controllers
High performance controller with logic and priority settings for monitoring toxic, combustible and refrigerant gases with versatile control functionality. Available with Modbus® or BACnet® communication with BAS, supports 4-20 mA and Modbus® driven VFDs.
RSL Remote Stack Light
Tower light with modular LED colors with steady or flashing light settings and two different sound types. A compact, pole mounted signal light with flashing or steady modes that are clearly visible from a distance.