GENie-NH3 Calibration Gas System

An easy to use, convenient gas calibration instrument for calibrating Ammonia gas sensors

Generates Ammonia in user adjustable quantities

Applications

  • Calibrating Ammonia gas sensors
  • and many more...

Key Features

  • Hand held, rugged design
  • 96 hours of use / 1,000 ppm hours of gas
  • User adjustable gas concentration outputs
  • Disposable gas vials do not expire and are non-hazardous for transport
  • Simple to use
  • Traceable to NIST standards

Description

The GENie-NH3 is a portable, hand-held, accurate gas calibration instrument for calibrating ammonia gas sensors. It uses a small, cylindrical sealed glass ampule that when broken and placed in the device, emits a small quantity of gas that is user adjustable allowing for the calibration of almost any ammonia detector on the market. The instrument requires a base unit (which provides a micro-processor based user interface and control system), an Ammonia (NH3) generating module and Ammonia gas source. The LCD display is capable of showing the menu structure in English, French, German and Spanish. It is powered by 4 heavy duty AA alkaline batteries that provide approximately 6 hours of continuous operation (at 0.5 LPM). It comes with 12 gas vials that do not have a shelf life and are non-hazardous to transport. Each vial will provide up to 8 hours of continuous calibration gas before the empty vial is discarded. The delivery hose comes standard with the unit o# erring a 1.5 m long x 4.76 mm OD (5 ft long x 3/16 in OD) Teflon lined hose for delivering the gas to the sensor or calibration adaptor. It also comes with a nylon carrying case for convenience and protection. The front of the carrying case is clear plastic, allowing the unit to be operated while within the case.

The GENie-NH3 should be sent back to the factory after 100 hours of use or annually for calibration to ensure proper operation of the ultraviolet light source, the flow meter and to replace the internal charcoal filter to promote optimum performance.

 

Calibration Gas
Gas Type
Ammonia (NH3)
Calibration Range
10 to 500 ppm
Source Life
8 hours per QCV vial
Accuracy
±10%
Repeatability
±5%
Mechanical
Size
127 x 98.55 x 79.5 cm / 5.0 x 3.88 x 3.13 inches
Weight
907 g / 2 lb
Tubing (supplied)
1.5 m long x 4.76 mm OD / 5 ft long x 3/16 inch OD Teflon lined hose
Flow Rate
Range 0.2 to 1.0 LPM
Lifespan
500 hours of operation (should be factory calibrated every 100 hours or annually)
User Interface
Display
LCD display
Push Buttons
SELECT and POWER push button type switches
Menu Languages
English, French, German, Spanish
Electrical
Power Source
Four alkaline AA batteries
Battery Life
approx. 5 to 6 hours
Warm-up Time
< 30 seconds
Environmental
Operating Temperature
0°C to 50°C / 32°F to 122°F
Operating Humidity
0 - 100% RH non-condensing
Certifications
Conforms to
EC Directive 89/336/EEC in accordance with the provisions of Statutory Instrument 2372
EN 50081-1 and EN 50082-1
Product Codes
GENIE-NH3
Ammonia gas generating module with one pack of 12 Ammonia (NH3) vials, includes Teflon lined hose (1.5 m long x 4.76 mm dia / 5 ft x 3/16 in dia), nylon carrying case, magnetic screwdriver, batteries and manual, does not include Base unit
GENIE-BASE
Base Unit for all GENIE Calibration Systems (required if not purchasing the Complete System KIT)
GENIE-NH3-KIT
Complete System - Includes base unit, QC-1 module and one 12 pack of Ammonia vials, (1.5 m long x 4.76 mm dia / 5 ft x 3/16 in dia), nylon carrying case, magnetic screwdriver, batteries and manual
Replacement Parts
QCV-NH3
Gas source for GENIE-NH3 module, replacement 12 pack Ammonia (NH3) gas source vials

Options, Accessories and More...