RLY-4 and RLY-8 Remote Relays
Provides an additional 4 or 8 relays to a fixed gas detection system
The RLY-4 and RLY-8 are remote relay devices that offer up to four and eight (respectively) additional SPDT dry contact relays to a fixed gas detection system
Applications
- Parking Facilities
- Vehicle Repair Shops
- Manufacturing Plants
- Food Processing Plants
- Cold Storage Facilities
- and many more...
Key Features
- Increases the number of available relays
- User selectable gas alarm activation level for each relay (set at the controller)
- User selectable “Failsafe” and latching operation (set at the controller)
- ON/OFF Delay configurations (set at the controller)
- User configurable to revert to a default state if connection is lost with the controller (set at the controller)
- Modbus® RS-485 RTU communication
- Standard water / dust tight, corrosion resistant enclosure
Description
The RLY-4 and RLY-8 are remote relay devices that offer up to four and eight (respectively) additional SPDT dry contact relays to a fixed gas detection system. The RLY-4 is specifically designed to communicate with both the QCC Quad Channel Controller and the FCS Flexible Control System via Modbus® communications protocol. The RLY-8 is designed to work with the FCS and FCS-8 only. In the event that the connection is lost between the controller and the remote relay, a user configurable default state can be set to ensure the relays continue to operate as required.
The relays are rated 5 amps @ 240 VAC each and can be used to control remote alarms, strobes, exhaust fan starters, make up air fan contactors, etc. Both devices come in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secured door.
Specifications
Product Codes
A maximum of seven RLY-8 devices (offering a maximum of 56 remote relays) can be connected to the FCS (with no RLY-4).
A maximum of one RLY-8 device (offering a maximum of 8 remote relays) can be connected to the FCS-8.
Technical Library
Options, Accessories and More...
Available with Modbus® or BACnet® communication with BAS, supports 4-20 mA and Modbus® driven VFDs
Available with Modbus® or BACnet® output for communicating with a BAS, DDC or other control panel
Converts 90 - 240 VAC power to 24 VDC power, providing a renewed amount of power to compensate for voltage drops in large fixed system applications and/or very long wire runs
Helps protect the gas detection equipment against abrasive damage, theft and vandalism
A low-current, high decibel, surface mount, vibrating horn for heavy-duty indoor or outdoor use
Available with Modbus® or BACnet® communication with BAS, supports 4-20 mA and Modbus® driven VFDs