Calibration Kit

The Calibration Kit contains the items necessary for common field and shop calibration

Comes in a durable, hard plastic carrying case for easy access and transport of tools required for calibration

Applications

  • Any location or environment in which you need to calibrate a gas detector/sensor
  • and many more...

Key Features

  • Easy access and transport of the tools required for calibration
  • Fittings and adapters accommodate different sized gas cylinders
  • Industry standard calibration adapter plug fits all internal sensors
  • Weather resistant carrying case
  • Calibration gas cylinders are not part of the kit, they are sold separately

Description

The Calibration Kit contains the items necessary for common field and shop calibration. The Kit comes in a durable, hard plastic carrying case and includes:

1. Regulator for fixed flow @0.5 LPM for 34 L, 58 L, 74 L, 100 L cylinders
2. Teflon lined, non-absorbent tubing, (2 ft / 61 cm, 3/16” ID, 5/16” OD) for calibrating sticky gases
3. Calibration adapter plug with O-ring and two zeroing port plugs (adapter plug fits industry standard internal sensor vents). One length (2ft / 61 cm, 1/16” ID, 5/16” OD)of standard tubing comes attached to the calibration adapter plug when the complete Calibration Kit is purchased
4. Potentiometer screwdriver with an inset and protruding end for adjusting resistors
5. Magnetic wand for non-intrusive calibration (2 5/8” x 1/4” hexagon) for use with the LPT-A, LPT-B, LPT-M, LPT-P and the SCC and DCC
6. Brass fitting to convert fixed flow regulator for use on 15 L and 17 L cylinders
7. Calibration adapter for CXT2 Explosion Proof transmitter, comes attached to standard tubing when the complete Calibration Kit is purchased
8. Sensor extracting tool for replacing used catalytic and solid state refrigerant sensors
9. Spare humidification sponge
10. Durable, hard plastic carrying case with handle
11. Humidification chamber for calibrating solid state refrigerant and TVOCs sensors, shown with standard gas flow tubing
12. Cal Clip for hands free calibration on devices with a splash guard

The Calibration Kit does not include cylinders of zero air or calibration span gas, these must be ordered separately. CETCI offers a range of gas types and concentrations in 17 L, 58 L and 100 L sizes. However, gas cylinders cannot be shipped from Canada to other countries, including the USA. Contact CETCI or our Customer Support Team at help@cetci.com for more information.

NOTE: The Calibration Kit is not suitable for use with the YES AIR or YES Plus LGA.

Product Codes
CET-715A-CK1
Complete Calibration Kit
REG-0715-CR2
Replacement regulator, fixed flow @0.5 LPM for 34, 58, 74 and 100 liter cylinders, male thread 
CET-7000-CAP
Replacement calibration adapter plug with O-ring and two zeroing port plugs for all internal sensors, does not include tubing
CET-8000-PAS
Replacement potentiometer screwdriver with an inset and protruding end for adjusting resistors
CET-SGC
Replacement calibration clip (Cal Clip) for hands free calibration for devices with a splash guard 
CET-8000-HC
Replacement humidification chamber with sponge for calibrating solid state refrigerant and TVOCs sensors 
CET-8000-HCS
Replacement sponge for humidification chamber 
CET-8000-SRT
Replacement sensor extracting tool  for replacing used catalytic and solid state refrigerant sensors
CET-MW
Replacement magnetic wand for non-intrusive calibration (2 5/8” x 1/4” hexagon) for use with the LPT-A, LPT-B, LPT-M, LPT-P and the SCC and DCC.
REG-ADAPTER
Replacement brass fitting that threads onto regulator to accommodate 15 and 17 litre cylinders 
CET-8000-CKFT
Replacement standard gas flow tubing, yellow, 3/16” ID / 5/16” OD, sold by the foot / 12 in / 30.4 cm
CET-8000-CTFT
Replacement Teflon lined gas flow tubing, 3/16” ID / 5/16” OD, special nonabsorbent for calibrating sticky gases, sold by the foot / 12 in / 30.4 cm
CXP-CAL
Replacement calibration adapter for CXT2 Explosion Proof Transmitter, does not come with tubing

Options, Accessories and More...