FCS-8 Flexible Control System (up to 8 Channels)

8 channel high performance Controller with logic control and priority settings for smaller gas detection applications

Available with Modbus® or BACnet® communication with BAS, supports 4-20 mA and Modbus® driven VFDs

Applications

  • Smaller Parking Facilities
  • Recreation Facilities
  • Food Processing Plants
  • Cold Storage / Freezer Rooms
  • Chemical Storage Rooms
  • and many more...

Key Features

  • Up to 8 channels of gas readings
  • FCS-M offers Modbus® RTU RS-485 digital output signal for LAN and WAN communications
  • FCS-B offers BACnet® MS/TP RS-485 output signal for WAN communications (for communicating with a BAS)
  • Graphic, full colour, resistive rouch LCD screen with LED indicators
  • Enhanced logic control, zoning and priority structure capabilities
  • Supports 4-20 mA and Modbus® driven VFDs
  • 4 dry contact relays, 5-amps @240 volts each
  • Line Voltage (90-240 VAC)
  • USB port for firmware upgrades and data logging
  • Two horn/strobe output drives
  • Configurable to comply with California Title-24 Energy Efficiency Standards
  • Door mounted audible alarm, optional water tight version available
  • Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rated with water tight, door mounted audible alarm installed

Description

The FCS-8 Flexible Control System is a sophisticated, high performance controller that offers up to 8 gas channel configurations for monitoring toxic, combustible and refrigerant gases with versatile control functionality for non-hazardous, non-explosion rated, commercial and light industrial applications. The FCS is designed to accept inputs from digital and/or analog transmitters and/or Peripheral Devices (in various combinations), using Modbus® RTU RS-485 or 4-20 mA analog input.

The FCS-8 is available in two models: the FCS-8-M with Modbus® RTU RS-485 WAN output or the FCS-8-B with BACnet® MS/TP RS-485 WAN output for communicating with a Building Automation System (BAS). Standard features include, four configurable SPDT dry contact relays with field configurable time delays and trigger levels, a full colour LCD resistive touch screen with LED panel indicating configurable channel alarm status, relay status and fault conditions, extensive menu system with password protection, enhanced logic control, priorities/zoning capabilities, a USB port for firmware upgrades, data logging and a door-mounted, audible alarm. The FCS has flexible configuration settings for analog outputs and supports 4-20 mA and Modbus® driven VFDs.

Optional value added features include, analog inputs and/or analog outputs, a top mounted strobe, a locking door, a manual shut off switch and a water tight, door-mounted audible alarm.

The FCS can be connected to several remote devices such as a remote strobe & horn, a Remote Display Module, an LNK-AO Analog Output device and an LNK-XT Network Extender. It can accommodate up to a maximum of 12 relays, including the 4 internal relays and either two RLY-4 Remote Relays or one RLY-8 Remote Relay device.

It can also be configured to comply with California Title-24 Building Energy Efficiency Standards. (Specification details need to be given at time of order and additional settings can be implemented in the field as required.)

Specifications

Mechanical
Enclosure
ABS / Polycarbonate, copper coated interior to reduce RF interference
IP54 rating with door mounted, water tight buzzer installed
Weight
1.8 kg / 4 lbs
Size
254 x 226 x 113 mm / 10.0 x 8.9 x 4.44 inches
User Interface
Display
8.1 cm (3.2”) graphic, 1/4 VGA full colour resistive touch LCD screen with LED indicators for “POWER”, “STATUS 1, 2 and 3” and “FAULT”
Input/Output
Input
Modbus® RTU RS-485 input (max 8, no analog inputs)
4-20 mA analog input (optional) (max 8, no digital inputs)
Output
Modbus® RTU RS-485 output to remote networked devices
Modbus® RTU RS-485 (model: FCS-8-M) output to BAS or DDC
BACnet MS/TP RS-485 (model: FCS-8-B) output to BAS or DDC
4-20 mA analog (optional)
Two drive outputs for strobe/horn - e.g. RSH-24 (0.5 amp @ 24 V max)
Relays
Four internal SPDT dry contact relays rated 5 amps @ 240 VAC
Audible Alarm
Standard loud, door mounted buzzer, rated 90 dB @ 30 cm (1 ft)
Optional: door mounted, water tight buzzer, rated 85 dB @ 60.96 cm (2 ft)
Top Mounted Strobe
Optional: bright, red, top mounted strobe, 10 - 30 VDC, 13 cm H x 6.1 cm dia / 5.2 inches H x 2.4 inches dia
Electrical
Power Requirement
Line Voltage: 90 – 240 VAC, 50 -60 Hz, 75 W
Current Draw
Line Voltage (110 VAC): approx. 1.0 amps
Line Voltage (220 VAC): approx. 0.5 amps
Power Distribution
Total power available for Remote & Peripheral Devices and Options 65 W @ 24 VDC
Wiring
Line Voltage: VAC 3-conductor shielded minimum 18 AWG stranded within conduit
LAN Modbus® RTU (version 1.1b3) RS-485, 16 gauge, 4-conductor shielded
WAN (output to BAS only): Modbus® RS-485 or BACnet® MS/TP, 4-conductor shielded
Fuses
Thermal, resetting
Environmental
Operating Temperature
-20°C to 40°C (-4°F to 104°F)
with internal heater
-40°C to 40°C (-40°F to 104°F)
Operating Humidity
15 - 90% RH non-condensing
Certifications
Conforms to:
CSA-C22.2 No. 205-12, UL508 (Edition 17):2007
EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010
FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCS-8-B, FCS-8-B-X models are Listed by BTL (where X represents one or more factory installed Options)
RoHS compliant circuit boards

Product Codes

Product Codes
FCS-8-M
Modbus® RTU RS-485 WAN Output FCS-8 Eight Channel Controller
FCS-8-B
BACnet® MS/TP RS-485 WAN Output FCS-8 Eight Channel Controller
Factory Options
-AI
Four internal Analog Inputs 4-20 mA
-2AI
Eight internal Analog Inputs 4-20 mA
-AO
Four internal Analog Outputs 4-20 mA
-2AO
Eight internal Analog Outputs 4-20 mA
-AIAO
Four internal Analog Inputs 4-20 mA and four internal Analog Outputs 4-20 mA
-DL
Enclosure door lock and keys to prevent unauthorized access to inside the enclosure
-IH
Internal heater for cold environment applications down to -40°C / 40°F
-L
Top mounted strobe, red lens, IP65 rated, 6.1 cm dia x 13 cm H / 2.4 in dia x 5.2 in H)
-SW
Manual shutoff switch (for emergency electrical shutdown, ventilation purge and to meet B52 code requirements)
-WA
Door mounted, water tight audible alarm, rated 85 dB @ 60.96 cm / 2 ft
Field Options
CET-FAO
Analog Output board for adding four internal 4-20 mA analog outputs to the FCS-8, installed in the field by qualified technician only
CET-FAI
Analog Input board for adding four internal 4-20 mA analog inputs to the FCS-8, installed in the field by qualified technician only
CET-BAC-MOD
CETCI BACnet Module for converting FCS-8-M WAN communication from Modbus® to BACnet®, installed in the field by qualified technician only
Compatible Analog (4-20 mA) Transmitters (requires factory installed -AI or -2AI Option)
LPT Series
Single channel analog gas detector for monitoring carbon monoxide, nitrogen dioxide, ammonia, chlorine, ozone or oxygen
LPT-A series
Single channel analog gas detectors for monitoring many different toxic, combustible or refrigerant gases
ART series
Single channel analog infrared refrigerant gas detectors with 0 - 3,500 ppm range
CGAS Detectors series
Single channel analog infrared CO2 gas detectors with 0 - 5000 ppm or 0 - 5% vol measurement range
CXT-A series
Single channel, analog explosion proof gas detectors for monitoring toxic or combustible gases in hazardous-rated areas
AST-IS series
Single channel, analog, infrared CO2 gas detectors with 0 - 2000 ppm or 0 - 4% vol measurement range
Compatible Digital (Modbus® RS-485) Transmitters
ART series
Single channel Modbus® infrared refrigerant gas detectors with 0 - 3,500 ppm range
CGAS Detector series
Dual channel digital gas detectors for monitoring many different toxic, combustible or refrigerant gases
LPT-P series
3 channel, digital gas detectors for monitoring CO, NO2 and combustible gases
LPT-M series
3 channel, digital gas detectors for monitoring many different toxic, combustible or refrigerant gases
CXT-D series
Single channel, digital explosion proof gas detectors for monitoring toxic or combustible gases in hazardous-rated areas
Peripheral Devices
LNK-AI (max 2, no internal AI)
Analog Input Peripheral Device that adds four 4-20 mA inputs, Modbus® RS-485 communication
LNK-AO (max 2, no internal AO)
Analog Output Peripheral Device that adds four 4-20 mA outputs, Modbus® RS-485 communication
LNK-XT
Network Extender Peripheral Device to extend the Modbus® RS-485 BUS wire length
QCC-RDM (max 4)
Remote Display for alternate location viewing of gas level readings
RLY-4 (max 2, no RLY-8)
Remote Relay that adds four relay outputs, rated 5A @ 240 volts each, Modbus® RS-485 communication
RLY-8 (max 1, no RLY-4)
Remote Relay that adds eight relay outputs, rated 5A @ 240 volts each, Modbus® RS-485 communication
RPS-24VDC
Remote Power Supply to provide power to extend the network of remote and peripheral devices
RSA-24V
Remote LED strobe light with audible, red lens, 8.9 cm / 3.5”, comes with mounting bracket
RSH-24VDC
Remote Strobe and Horn combo, red lens, mounted on enclosure, 24 VAC/VDC, rated 99 dB @ 3 m (10 ft) (VAC), 97 dB @ 3 m (10 ft) (VDC)
RSH-24V-A
Remote Horn/Strobe Combo, unmounted, 24 VAC/VDC, rated 99 dB @ 3 m (10 ft) (VAC), 97 dB @ 3 m (10 ft) (VDC), amber lens
RSH-24V-B
Remote Horn/Strobe Combo, unmounted, 24 VAC/VDC, rated 99 dB @ 3 m (10 ft) (VAC), 97 dB @ 3 m (10 ft) (VDC), blue lens
RSH-24V-R
Remote Horn/Strobe Combo, unmounted, 24 VAC/VDC, rated 99 dB @ 3 m (10 ft) (VAC), 97 dB @ 3 m (10 ft) (VDC), red lens
RSH-TMR
Remote Horn/Strobe Combo, red lens, mounted on enclosure, with built in timer and shut off switch, 24
VAC/VDC, rated 99 dB @ 3 m (10 ft) (VAC), 97 dB @ 3 m (10 ft) (VDC)

Options, Accessories and More...

rly-4-and-rly-8-remote-relays

RLY-4 and RLY-8 Remote Relays

The RLY-4 and RLY-8 are remote relay devices that offer up to four and eight (respectively) additional SPDT dry contact relays to a fixed gas detection system

rps-24vdc-remote-power-supply

RPS-24VDC Remote Power Supply

Converts 90 - 240 VAC power to 24 VDC power, providing a renewed amount of power to compensate for voltage drops in large fixed system applications and/or very long wire runs

lnk-ao-analog-output-peripheral-device

LNK-AO Analog Output Peripheral Device

Adds four channels of 4 - 20 mA analog output to a Modbus® RS-485 network configured with a QCC Quad Channel Controller or an FCS Flexible Control System Controller

lnk-ai-analog-input-peripheral-device

LNK-AI Analog Input Peripheral Device

The LNK-AI Analog Input peripheral device adds four channels of 4 - 20 mA or 0 - 10 volt analog inputs to a Modbus® network configured with an FCS Flexible Control System Controller

lnk-xt-network-extender-peripheral-device

LNK-XT Network Extender Peripheral Device

Ideal for large applications to create an efficient distribution network of specialized gas detection devices that can communicate over large distances

remote-industrial-horn

Remote Industrial Horn

A low-current, high decibel, surface mount, vibrating horn for heavy-duty indoor or outdoor use

remote-strobe-light

RSA-24V Remote LED Strobe Light

A remote LED strobe light with multiple user selectable flash patterns, comes with wall mounting bracket for easy installation

remote-strobe-horns

RSH-24VDC Remote Strobe & Horn with Enclosure

Comes mounted on a water / dust tight enclosure for easy installation, offers a visual and an audible alarm feature in one compact, low profile device. 

remote-strobe-horn-with-timer

RSH-TMR Remote Strobe & Horn with Timer

Combines a visual and an audible alarm feature into one device that has a manual shutoff switch to silence the alarm for a programmed period of time

remote-strobe-horns

RSH-24V Remote Strobe & Horn

Available in 3 different lens colours, combines a visual and an audible alarm feature into one compact, low profile device

Sun Shade

Improves readability of display in sunny locations and provides protection from rain and snow

Show all related products

VIEW