FCS-RDM Remote Display {COMING SOON}

    Key Features

  • » 
    8.1 cm (3.2”) Graphic, full colour LCD touch screen
  • » 
    Internal audible alarm
  • » 
    Modbus® RS-485 RTU communication
  • » 
    Output for remote strobe and/or horn connection
  • » 
    Connection loss detection to ensure accurate information
  • » 
    Standard, dust / water tight, corrosion resistant enclosure (drip proof)
The FCS-RDM is a remote display device specifically designed to communicate with the FCS Flexible Control System. It displays much of the same information as the FCS and can be viewed from a remote, relevant location such as a refrigeration application where there are two different entrances to the chiller room. The FCS-RDM employs connection loss detection to ensure the information that is displayed is current. Simple configurations including setting the Modbus ID and baud rate can be done in the field. The display can be configured to show / not show one or more channels of interest.
The FCS-RDM comes in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secured door. 


  • » 
    Refrigeration and Cold Storage Rooms
  • » 
    Manufacturing Plants
  • » 
    Chiller Rooms
  • » 
    Food Processing Plants
  • » 
    ... and many more



ABS / Polycarbonate, rated UL94-5VA, designed to meet IP54 standards.
Copper coated interior to reduce RF interference.
Weight: 317.5 g (11 oz)
Size: 127 mm x 127 mm x 71 mm (5.0” x 5.0” x 2.8”)


Power Requirement:
24 VDC, 1.5W, Class 2
24 VDC supplied by the FCS
4-wire shielded network wiring between the FCS and FCS-RDM
Fuses: Automatic resetting thermal


Input / Output

Output: Connection for remote strobe/horn
Audible Alarm: Internal audible alarm
Receives Modbus® commands from FCS and displays much of the same information


User Interface

8.1 cm (3.2”) Graphic, full colour LCD touch screen
Status LED indicators for “POWER”, “STATUS 1, 2 and 3” and  “FAULT”
Accessed using the touch screen



Operating Temperature: -20°C to 40°C (-4°F to 104°F)
Humidity: 15 - 90% RH non-condensing


Conforms to: CSA-C22.2 No. 205-12, CSA C22.2 No. 61010-1-12
                      UL508 (Edition 17):2007, UL 61010-1 (Edition 3)
Conforms to: EMC Directive 2004/108/EC
                      EN 50270:2006, Type 1, EN61010
Conforms to:  FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

More Brochures

Product Specifications

Application Brochures



Sensor Specification

Engineering Specification Samples


Operation Manual

Part Numbers

Description Code
Remote Display for FCS Flexible Control System, graphic full colour touch screen display, 24 VDC, horn/strobe output drive, internal alarm, Modbus® communication, connection loss detection, water / dust tight, corrosion resistant enclosure  FCS-RDM

Remote Devices

Description Code
Remote Horn/Strobe Combo, rated 100 dB @ 3 m (10 ft)  RSH-24VDC
Very bright, 10.16 cm (4 in) industrial LED beacon with 3 flash patterns. Surface mount or 1.27 cm (1/2 in) NPT conduit mount. 12 - 80 VDC required power  STROBE 4 DCMV
Strobe, 24 V, size: 7 cm dia x 12.7 cm H (2.75 in x 5 in), remote mount, hardware not included  STROBE 24V-R

Metal Protective Guard

» 16 gauge, clear anodized metal protective guard
» Larger size for controllers & self-contained systems
» Smaller size for analog & digital transmitters

Remote Strobe Light

» Low profile, lightweight
» Weather and corrosion resistant
» Surface mount and 1/2” NPT conduit mount

RSH-24VDC Remote Strobe & Horn Combo (with Enclosure)

» Two alarm features combined into one device
» Light weight, weather and corrosion resistant
» Independent settings for horn, strobe or horn and strobe together
» Surface mount and 1/2” NPT conduit mount
» ABS / Polycarbonate water / dust tight enclosure

RSH-24V Remote Strobe / Horn (no enclosure)

» Multi alarm features combined into one device 
» Independent settings for horn, strobe or horn and strobe together
» Light weight, weather and corrosion resistant

Bookmark and Share

Contact Us

General Inquiry
Application Support
Quote Request
Maintenance Support
Technical Support
RMA Request
Distribution Opportunity