Tag Archive | "food plant"

Six Factors to Consider Prior to Choosing an Electronic Enclosure Pt. 2 of 6

Choosing the right enclosure maybe as important as selecting the right product. An electronic enclosure, also known as housing, helps protect the circuit board allowing it to function properly. Elements (e.g. water, wind, dust, dirt, heat, cold, humidity, and chemicals) in the surrounding environment could damage or deteriorate the product (see Figure 1).

For example, large temperature variations between the inside and outside of the enclosure can result in pressure differences that may create a vacuum and draw water through the fittings or component and gasket seals. Or when moist air reaches its dew point, it can no longer hold its form and forms moisture droplets being formed on any available surfaces. This is called condensation. When temperatures are below freezing, it will condense into frost. After time, corrosion occurs and causes electrical resistance, which in turn generates additional heat, product performance problems, rusting, increasing risk of circuit shorting out, and arcing and sparking incidences.

Here are six factors to think about before choosing an enclosure:

  • Environment
  • Application
  • Thermal management requirements
  • Enclosure performance standards
  • Material
  • Size

Application can be associated with market or product. Market applications would be locations such as water treatment plants, parking garages, pools, arenas, repair shops, food plants, etc. Product applications would be physical enclosure requirements such as wall mount, duct mount, easy access, etc.

Written by: Teresa Kouch, Marketing

Continue to pt. 3 of 6 >>>

Posted in Enclosures, ProductsComments (4)


Gas Detectors

CETCI gas detectors are used to detect many different gases. Some of the most common are Carbon Monoxide, Carbon Dioxide, Nitrogen Dioxide, Nitric Oxide, Ammonia, Chlorine, Ozone, Combustible Gases like Methane and Propane, Oxygen, Refrigerants and more.

IAQ Monitors

The YES Series of IAQ Monitors are essential for those responsible for conducting Indoor Air Quality (IAQ) Investigations. These instruments are specifically designed to measure and record the quality of indoor air in offices, buildings, homes, schools, parking garages, ice rinks, etc.