Featured Stories
CETCI Launches the FCS Flexible Control System, a High Performance Gas Detection Controller with Logic Control CETCI Launches the DCC-MRI Oxygen Monitoring System Four Channel Gas Detector for Wastewater Treatment Plants What is the difference between Residential and Commercial Gas Detectors and why should Residential Detectors NOT be used in Commercial or Industrial Applications? Calibration Could Save Your Life
 
CETCI Launches the FCS Flexible Control System, a High Performance Gas Detection Controller with Logic Control

CETCI Launches the FCS Flexible Control System, a High Performance Gas Detection Controller with Logic Control

Delta, British Columbia, Canada – Critical Environment Technologies Canada Inc. (CETCI) is pleased to announce the release of our FCS Flexible Control System. The FCS replaces the PDC, offering dramatic technological and functional improvements over its predecessor. The FCS Flexible Control System is a sophisticated, high performance Controller that offers up to 128 gas channel […]

CETCI Launches the DCC-MRI Oxygen Monitoring System

CETCI Launches the DCC-MRI Oxygen Monitoring System

Delta, British Columbia, Canada – Critical Environment Technologies Canada Inc. (CETCI) is pleased to tell you about the DCC-MRI Oxygen Monitoring System for MRI room applications in hospitals and clinics. The DCC-MRI replaces our GEM-MRI, offering technological and functional improvements over its predecessor. Magnetic Resonance Imaging equipment is cooled by compressed gas. Compressed gas, if […]

Four Channel Gas Detector for Wastewater Treatment Plants

Four Channel Gas Detector for Wastewater Treatment Plants

Critical Environment Technologies Canada Inc, (CETCI) offers strategic and reliable gas detection solutions for many applications, including wastewater treatment plants. Our QCC Quad Channel Controller, is an ideal fixed gas detection system for this type of application. A wastewater treatment facility is a wet maze of rooms, pipes, pumps, wells, chambers, concrete tanks and settling […]

What is the difference between Residential and Commercial Gas Detectors and why should Residential Detectors NOT be used in Commercial or Industrial Applications?

What is the difference between Residential and Commercial Gas Detectors and why should Residential Detectors NOT be used in Commercial or Industrial Applications?

Commercial gas detectors can be as much as 100 times the cost of residential gas detectors, making the residential models financially tempting, especially for large area applications. However, there are some important differences in performance, diagnostics, regulatory standards, and configurability between the two that make using residential models in commercial or industrial environments insufficient, dangerous […]

Calibration Could Save Your Life

Calibration Could Save Your Life

There are numerous gases, some humanly detectable and others not, leaking around in the places where we work and play that could be potentially life threatening to us living, breathing beings if they exist in excess of healthy concentrations. Luckily, there are gas detector and indoor air quality systems to detect and alert us when […]

Monitoring Ozone (in the air) in Hatchery & Fish Farm Applications

Monitoring Ozone (in the air) in Hatchery & Fish Farm Applications

25 November 2015

Critical Environment Technologies Canada Inc, (CETCI) offers strategic and reliable gas detection solutions for many applications, including ozone gas detection in the aquaculture industry. Hatcheries, fish farms and such in the aquaculture industry require clean water to maintain a high survival rate while rearing aquatic animals. Contaminated water increases the risk of infection which in […]

Read the full story

Posted in Applications, Products, TransmittersComments Off on Monitoring Ozone (in the air) in Hatchery & Fish Farm Applications

Multiple Gas Detectors – Should They all be Calibrated at the Same Time?

Multiple Gas Detectors – Should They all be Calibrated at the Same Time?

02 October 2015

Depending on the number and placement of gas detectors in your facility, you might be looking at the task of calibrating them as never-ending. It is true, calibration can be time consuming, especially if it is a large area populated with multiple fixed location sensors with different gas types – some near the ceiling, others […]

Read the full story

Posted in EducationalComments Off on Multiple Gas Detectors – Should They all be Calibrated at the Same Time?

Where are the Gas Detectors in Public Swimming Pool Facilities?

Where are the Gas Detectors in Public Swimming Pool Facilities?

20 August 2015

Indoor swimming pools provide exercise and recreational fun for all ages. To ensure swimmers are submerged in crystal clear, sanitary water, a disinfectant maintenance program using Chlorine, or Chlorine & Ozone are commonly followed to treat the pool water. Chlorine is a powerful, corrosive disinfectant and in both gas and liquid forms it is toxic […]

Read the full story

Posted in Educational, HealthComments Off on Where are the Gas Detectors in Public Swimming Pool Facilities?

CETCI’s CXT Explosion Proof Transmitter

CETCI’s CXT Explosion Proof Transmitter

29 July 2015

Our CXT Explosion Proof Transmitter delivers reliable, accurate monitoring of toxic or combustible gases in potentially explosive and harsh environments and meets CSA and ATEX standards for use in hazardous locations where the potential for explosions is extremely high. Click here to read more…  

Read the full story

Posted in Products, TransmittersComments Off on CETCI’s CXT Explosion Proof Transmitter

What is the Difference Between Explosion Proof and Intrinsically Safe Gas Detectors?

What is the Difference Between Explosion Proof and Intrinsically Safe Gas Detectors?

29 July 2015

It only takes a spark to start a fire or cause an explosion, especially when flammable gases or vapours are present under the right conditions. There are industries that operate in these types of hazardous environments where the potential for explosions is extremely high, such as chemical plants, oil refineries, paint shops, cleaning facilities, tanks […]

Read the full story

Posted in EducationalComments Off on What is the Difference Between Explosion Proof and Intrinsically Safe Gas Detectors?

How often do gas cylinders need to be replaced?

How often do gas cylinders need to be replaced?

29 July 2015

Gas cylinders are made by many different manufacturers, are available in a variety of sizes, can be disposable or refillable and filled with a low, high or pressurized concentration. Generally speaking, the shelf life of calibration gas, (also known as span gas), is dependent on three factors: Gas Type Gas Concentration Gas Cylinder Quality and […]

Read the full story

Posted in AccessoriesComments Off on How often do gas cylinders need to be replaced?

Archives

  • I posted a new photo to Facebook ,
  • CETCI Launches the FCS Flexible Control System, a High Performance Gas Detection Controller with Logic Control... ,
  • We are going to the AHR Expo in Vegas. Are you? If so, drop by our booth to say Hi! Check us out on Map Your Show... ,
  • I posted a new photo to Facebook ,
  • Tutorial – How to Calibrate the DST-ECO: via @YouTube,
  • Last day of the AHR Expo in Mexico. Word is, it's been a great show!,
  • We make gas detectors for monitoring toxic, combustible and refrigerant gases for a wide range of applications.... ,
  • BTL Listing granted for CETCI BACnet® Module... ,

Gas Detectors

CETCI gas detectors are used to detect many different gases. Some of the most common are Carbon Monoxide, Carbon Dioxide, Nitrogen Dioxide, Nitric Oxide, Ammonia, Chlorine, Ozone, Combustible Gases like Methane and Propane, Oxygen, Refrigerants and more.

IAQ Monitors

The YES Series of IAQ Monitors are essential for those responsible for conducting Indoor Air Quality (IAQ) Investigations. These instruments are specifically designed to measure and record the quality of indoor air in offices, buildings, homes, schools, parking garages, ice rinks, etc.